BVA Hydraulics P240L - Manual (Page 2)

2
Figure 1- Model P240L Nomenclature
Always check connections before using. Alteration of these products is strictly prohibited. Use only those adapters
and attachments provided and approved by the manufacturer.
!
!
Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall
have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and
safety information shall be conveyed in operator’s native language before use of this product is authorized. Make certain that the
operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as
to the safe and proper use of this product as outlined in this factory authorized manual, remove from service immediately.
Inspect before each use. It is recommended that, prior to each use, an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized replacement parts only. Any
pump that appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed from service immediately
until such time as repairs can be made. Owners and operators of this equipment shall be aware that the use and subsequent
repair of this equipment may require special training and knowledge.
BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for performance and safety. This lever operated
pump will supply compressed hydraulic fluid to compatible applications i.e. rams, presses, spreaders, compactors and crimping
machines, anywhere that 7,200 psi of fluid pressure is needed. Special skill, knowledge and training may be required for a specific
task and the product may not be suitable for all the jobs described above. Unsuitable applications would include applications that
call for a device to move, level or support persons, animals, hazardous materials, mobile homes/ dwellings in general, mirrors
and/or plate glass, and/or to connect/secure hatches, components, etc. between bulkheads. The user must ultimately make the
decision regarding suitability of the product for any given task and assume the responsibility of safety for himself/ herself and
others in the work area.
PrODUct DEScrIPtIOn
To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of each
pressurized attachment be equal to or greater than the rated working pressure developed by the hydraulic pump.
operating handle handle socket
release valve
reservoir
oil output port
pump piston (not shown)
oil filler screw
rear endcap
Figure 2- Pump Dimensions
G
A
C
B
D E
F
1/4"- 18NPTF
H I
rear endcap
fastener