BVA Hydraulics PA1500M, PA3801M - Manual (Page 2)

PRODUCT DESCRIPTION
BVA Hydraulics Double Acting Air Hydraulic Pump is
engineered to meet most industrial standards for Performance
and Safety. It is an air hydraulic pump with 4-way valve. It’s
unique hydraulic circuit allows quick displacement of hydraulic
fluid under no load conditions and easy pumping in loaded
conditions. Pump supplies compressed hydraulic fluid to
compatible double-acting cylinder, anywhere that 10,000 PSI
of fluid pressure is needed. It is suited for plant maintenance,
production, bolting, vehicle repair, and any task that requires
hydraulic pressure from air input. Special skill, knowledge
and training may be required for a specific task and the
product may not be suitable for all the jobs described above.
Unsuitable applications would include applications that call for
a device to move, level or support persons, animals, hazardous
materials, mobile homes/ dwellings in general, mirrors and/or
plate glass, and/or to connect/secure hatches, components,
etc. between bulkheads. The user must ultimately make the
decision regarding suitability of the product for any given task
and assume the responsibility of safety for himself and others
in the work area.
WARNING: To reduce the risk of personal injury and/or
property damage, ensure that the rated working pressure
of each pressurized attachment be equal to or greater
than the rated working pressure developed by the
hydraulic pump.
WARNING: Always check connections before using.
Alteration of these products is strictly prohibited. Use
only those adapters and attachments provided and
approved by the manufacturer.
2
Figure 1 - Model PA1500M Components
SPECIFICATIONS
Model
Number
Usable Oil
Capacity
(in 3 )
Rated
Pressure
(psi)
Output Flow Rate
(in 3 /min)
Input Air
Pressure
(psi)
Output
Port
Threads
Input
Port
Threads
Weight
(lbs)
No Load Load
PA1500M 91.5
10,000 66 11 110-175 3/8"-18NPT 1/4"-18NPT
19.4
PA3801M 232 30
Control Valve Knob
Manifold Plug/
Oil Output Port
Oil Reservoir
Carry Handle
Plastic Cap/
Air Input Port
Foot Pedal
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read and understand
the information contained within. The owner and operator shall
have an understanding of this product and safe operating
procedures before attempting to use this product. Instructions
and safety information shall be conveyed in the operator's
native language before use of this product is authorized. Make
certain that the operator thoroughly understands the inherent
dangers associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this product
as outlined in this factory authorized manual, remove from
service immediately.
Inspect before each use. It is recommended that, prior to each
use, an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/ safety labels or
signs be replaced with BVA Hydraulics authorized replacement
parts only. Any pump that appears to be damaged in any way,
is worn, leaking or operates abnormally shall be removed from
service immediately until such time as repairs can be made.
Any pump that has been or suspected to have been subject
to a shock load (a load dropped suddenly, causing the system
pressure to exceed 10,000 PSI), shall be removed from service
immediately until checked out by a BVA Hydraulics authorized
service center. Owners and operators of this equipment shall
be aware that the use and subsequent repair of this equipment
may require special training and knowledge.
!
!