Assembling the bar stools, Maintenance – AmeriHome BABBS2 Bamboo Bar Stools User Manual

Page 5

Advertising
background image

ASSEMBLING THE BAR STOOLS

BABBRC Bamboo Bar Set Assembly & Operating Instructions

5
















Screws

Figure 8

Place the legs so that the opening in the top of
the legs straddles the Support Beam on the
bottom side of the Seat. NOTE: Make sure the
holes on the legs face each other. When both
legs and their supports are in place, secure the
legs to the Seat using 4 screws.








Bolts
Washer
Nut

Figure 7

Place the Leg Supports (#12)
between the Legs so that the post on
the support faces the hole on a
corresponding leg. Attach Bolts at the
bottom of each leg.


MAINTENANCE


Before use, check the nuts and bolts on a regular basis to make sure they are tight.


When used outdoors, place on a dry surface such as concrete or decking, and not in wet areas such as
grass. Cover during inclement weather. Mild household cleaning products can be used for cleaning.


Bamboo is not a wood but actually a woody variety of grass. Although it is a grass, the thick bamboo
poles are two to three times as strong as wood. However, it will fade in color and can sometimes crack.
These are the natural properties of Bamboo.

Before use, always inspect the stools and bar unit for any cracks. Do not use if any component is
damaged and may cause harm.

Bamboo should retain its strength for many years. However, when stored outdoors, it will age naturally
from a light tan to a silvery gray. You may choose to allow it to age naturally or apply a UV-resistant
varnish at least once a year. Ties can be replaced as needed.

Advertising
This manual is related to the following products: