AmeriHome ICM6 6 Qt. Ice Cream Maker - Manual (Page 3)

ICM6 Ice Cream Maker Instructions 3
ICM6 Ice Cream Maker Assembly & Instructions
NOTE: Prepare Ice Cream mixture in advance. (See Recipes for directions.)
NOTE: Melting ice will drain from the bucket. Place bucket in an area that won’t be damaged from water.
A. Place the Blending Paddle into the canister.
B. Make sure the Stabilizing Ring is placed at the bottom of the bucket. Insert Canister into Bucket.
Position it over the center hole.
C. Pour the ice cream mixture into the canister. Put the Canister lid on top.
D. Slide the rectangular end of the Electric Motor or hand crank into the rectangular
hole on the rim of the wooden bucket.
E. Slide the opposite side of electric motor into latch.
F. Lift the latch so that the wire goes over the rounded end of the hand crank or
motor. Lock the latch to secure the electric motor.
G. Prepare the wooden bucket by filling it with ice to the top of the canister.
H. Add 1-2 cups of rock salt to the top of the ice inside the bucket.
1. Hand Crank
2. Electric Motor
3. Latch
4. Power Cord
5. Wooden Bucket
6. Stabilizing Ring
7. Canister Lid
8. Canister Lid Cap
9. Ice Cream Canister
10. Plastic Stirrer
11. Blending Paddle
12. Power Switch
Follow the diagram to locate and assemble the individual pieces.
A B C D E
F
Visit amerihomebrand.com/IceCream for instructions & videos
12