DE-STA-CO IM-pAC AC Drive Getting Started Guide User Manual
Im-pac, Getting started guide
Advertising
Table of contents
Document Outline
- Contents
- Declaration of Conformity
- 1 Read Me First Instructions
- 1.1 Data Sheet
- 1.2 Drive Size
- 1.3 Safety
- 1.4 Mounting of Drive
- 1.5 Wiring Motor
- 1.6 Motor Jumper Configuration for 1/3 hp and 1.00 hp motors
- 1.7 Wiring Power and Switches to Drive
- 1.8 Programming
- 1.9 Speed Control
- 1.10 Overload Protection
- 1.11 Brake Motors
- 1.12 Reversing the Motor
- 1.13 Emergency Stop Safety
- 1.14 Warranty and Return Policy
- 1.15 Disposal
- 1.16 Indexer drive shown in middle of dwell position diagram.
- 1.17 Drive default parameter list for a single preset speed application
- 1.18 Drive parameter list for using a potentiometer to control speed
- 1.19 Drive parameter list for using a potentiometer to control speed with a proximity switch for cycling
- 1.20 Drive parameter list for using a potentiometer and switch selected presets to control speed
- 1.21 Drive wiring for using a potentiometer and switch selected presets to control speed
- 1.22 Drive parameter list for using a PLC to control speed
- 1.23 Drive wiring for a PLC to control speed
- 1.24 How to configure the IM-pAC drive to trip for a current overload.
- 1.25 Drive parameter list for a motor reversing application
- 1.26 Drive wiring for a motor reversing application.
- 1.27 Drive parameter list for a 24Vdc brake motor
- 1.28 Drive wiring for a 24Vdc brake motor
- 1.29 Drive and Options part numbers
- 2 Safety Information
- 3 Rating Data
- 4 Mechanical Installation
- 5 Electrical Installation
- 6 Keypad and Display
- 7 Parameters
- 8 Diagnostics
- 9 UL Listing Information