DE-STA-CO F5-B AC Inverter Drive - Manual (Page 9)

9
PEL1N/L2
L3++--
Wa
Ein Fe schutz s ist als alle
i
Schutzm
aßna
nicht zulÌä
ssig
Die Ko entlad beträg
T2
T1
PB
PA
W
V
U
PE
185 mm
7.3 in
175 mm
6.9 in
144 mm 5.7 in
158 mm 6.2 in
76 mm
3.0 in
5mm 0.2 in
X2A
X4A
X1B
X1A
With Oper
ator
With Co
ver
2.4 Dimensions and terminals
Pay attention to the input voltage, since both 230V and 460V units (3-phase)
are possible. On the 230 VAC sytems The PA, PB, T1, T2 terminals will be not
included on the inverter.
X1A Connection from the line
X1B Connection to the motor, brake resistor, temp sensor
X2A Connection for control cables
X4A Connection for Operator/display HSP5-Service cable
Connection for shield / ground
Weight 1/2 kg / 1 lb
Product Description
2.4.1 A Housing
On the 460 VAC inverters a jumper must be placed between T1 & T2 if a thermo
sensing device isn’t used. T1 & T2 are located on terminal X1B.