Envizen V7028D - Manual (Page 5)

If use the pattern, as below:
1. You must ensure the four-point connection when you draw
the unlock pattern.
2. Click Continue and draw again to confirm it
3. Cilck confirm to complete unlock pattern designing.
4. Each time you open or waking your MID device, you must
draw pattern to unlock the screen.
5
1.2.10 Startup programs
Click all the application icon you want to start and it can
switch on.
1.2.11 Close programs
Press the icon continuously or the ESC key, the device will
close the active program. You can also use the corresponding
function in the management currently running applications
to close the program.
1.2.12 Screen operation
● Zoom in and zoom out : In applications which support
zoom gestures, such as photo , IE browser, mail and map etc.
you can zoom in or out the screen contents by opening or
closing your two fingers.
● Rolling: In applications which support rolling gestures,
such as photo , IE browser, mail and map etc. you can scroll
the screen contents by sliding your fingers on the screen. If
you want to stop the rolling screen, you just need to touch it.
1.2.13 Home screen
● Switch home screen
In the home state, you can change the home interface by
s
applied in one direction.
2. Do not remove the TF card before Uninstalling it, or the
card may be damaged.
3. If the memory card is write-protected, data will not be
formatted and written, please remove the write protection
before such operations
4. Major brands memory card is recommended to avoid the
card is not compatible to this device.
5
. please well note that the APK (such as application software and
games) is default installed to the device. (not the memory card)
1.2.8 Connected to the computer
One end of the USB line connect to the computer, the other
end connect the MID device, select Settings>Developer
options>USB debugging, the device will connect with
computer, and you can copy files to the device.
4
1.2.9 Browse the file in the device