I-View CP-2160RD Deluxe Real Time Recording DVR Card - Manual

1
CP-2160RD Deluxe DVR Board Hardware Manual (V1.4)
This section details the installation of your CP-2160RD Deluxe DVR board and how to make the necessary
connections. You may install up to 2 cards into a PC to reach 32 Video and 32 Audio input. The primary one is
referred as CP-2160RD Deluxe 0, the other one will be called CP-2160RD Deluxe 1. Before you start, please
make sure that your PC is off, and the power cable is unplugged.
The DVR system is called CP-2320RD Deluxe when combine the CP-2160RD Deluxe 0 and CP-2160RD
Deluxe 1 card onto a PC together.
The description of CP-2160RD Deluxe (as Fig 1) pins and sockets:
1: Video input –DB25 pin to connect the D-Sub BNC cable for video input.
2: TV out – S connector for single and split video output.
3: Video looping- Connect to a video looping board for video loop-out.
4 & 5: Transmit video signal – Link the S_TV_IN (5) socket of CP-2160RD Deluxe 1 into the S_TV_OUT (4)
socket of CP-2160RD Deluxe 0 DVR board to get 1-32 video signal output via a TV output port.
6: RESET- System failure socket, connect to the “ Reset “ socket of PC Motherboard. (CP-2160RD Deluxe 0)
7: EM_B – Panic button socket (CP-2160RD Deluxe 0 only)
8: LED – The indicator of auto reboots function. (CP-2160RD Deluxe 0 only)
9: 4 Pin power socket – The socket for power input from power supply of the PC. You must connect the power;
otherwise the CP-2160RD Deluxe DVR Bard cannot work properly.
10: Sensor connector-Connect to the sensor cable of the remote controller. (CP-2160RD Deluxe 0 only)
11: J11 – Connect the “Linking cable “between CP-2160RD Deluxe 0 and 1 to control 1-32 single and split
video out via a Remote Controller.
12: Audio in - Connect to an audio board for audio input.
13: J_USB – Connect to USB cable to the USB port of PC Motherboard.
14: PCI Express Bus – Plug PCI Express slot of Motherboard.
15: Jump – For DVR card number selection.
(Fig 1)