I-View CP-4800DX Hybrid DVR Card - Manual (Page 4)

4
1. Completing Setup
Complete setup by following three steps:
1. Run Witness XP program, login, and press the System configuration button. In the system
configuration window, enable both “Watch dog timer” and “Auto-run”.
2. Disable the Windows login password; let your PC proceeds directly into Windows, otherwise the system can
not work properly when Power Failure or System Failure reboot, because of the halt by the login Windows.
3. After everything is connected and the prior two steps are completed, turn on your PC, run Witness Pro and
make sure that CP-4800DX XP 0’s LED display the following behavior: Light is on for 20 seconds, then off
for 20 seconds, then on for 20 seconds, etc to confirm that the system is working properly.
2. Using the Remote controller
On your remote controller, there should be buttons labeled with numbers representing camera numbers. Points
the remote controller at the sensor/receiver, press the number of the camera you wish you to on the TV and it
would appear.
Number key: For the video channels selections.
Simply press the number key from the “Display”
section to display the selected video channel on the
connected monitor.
F1: Click this key to select the 1-16 split video out of CP-4800DX XP 0 Card (Main Monitor 0).
F3: Click this key to select the 17-32 split video out of CP-4800DX XP 1 Card (Main Monitor 1).
F2: Click this key to select the 1-16 split video out of Spot Monitor 0 (Option)
F4: Click this key to select the 17-32 split video out of Spot Monitor 1 (Option).
Split Section: Push the splitter key on “ Split ” section, and then you will watch the splitter video on TV.
(Click the ● icon to change 6, 8, 10, 13 split screen sequence)
Return: After you use Display function, then you will return to all channels scroll. You need to push F1, F2,
F3 or F4 and then “ Return “ key to go back the TV display when you click the “ Return “ Key.
For example:
1. If you want to view the video of camera 22 on TV; click “ F3 “ key and then entry “ 6 “ number key, you
will watch the camera 22 single video on TV.
2. If you want to view the 4 split video (Camera 17-20) on TV; click “ F3 “ key and then entry “ “key, then
you will watch the 4 split video (Camera 17-20) on TV.
The “ 1-16 “ number key of Display section, “ 1 “ number represent camera 1 and 17, “2” represent camera 2 and
18.