I-View DM-5MIPN 5-Megapixels Vandal Proof Dome IP Camera - Manual (Page 38)

38
UPnP: Click this button to enable the UPnP (Universal Plug and Play) function.
UPnP™ is a networking architecture that provides compatibility among networking equipment,
software and other hardware devices. The UPnP protocol allows devices to connect
seamlessly and to simplify the implementation of networks in the house and corporate
environments. With the function enabled, you don’t need to configure the port mapping for
each port, and the camera is connected to the Wide Area Network via the router.
1. Check “Enable UPnP™ icon from settings interface.
2. Click Edit icon to select the Protocol and then entry the Internal/External Port.
3. Click Add icon to increase this port. Repeat the 1-3 to add another port.
4. Click Save icon to save the setting.
You can edit the Friendly Name of the IP Camera. This name can be detected by corresponding
device, such as a router.