Lexibook RCD100BB - Manual (Page 3)

ENGLISH
Copyright © Lexibook 2006

Copyright © Lexibook 2006
ENGLISH

1. POWER ON / OFF
2. DISPLAY
. POWER INDICATOR
. PLAY / PROG INDICATOR
. REPEAT INDICATOR
6. X-BASS BUTTON
7. REPEAT BUTTON
8. PROG BUTTON
9. B.SKIP BUTTON
10. STOP BUTTON
11. PLAY / PAUSE BUTTON
12. F.SKIP BUTTON
1. FM ST. INDICATOR 1. FUNCTION SELECTOR
1. TUNING CONTROL
16. BAND SELECTOR
17. VOLUME CONTROL
18. CD DOOR
19. CD COMPARTMENT
20. DC JACK
21. AUX IN
22. HEADPHONE JACK
2. BATTERY COMPARTMENT
2. FM ANTENNA
2. HANDLE
BATTERY OPERATION
This CD player operates with 6 X C size batteries (not included) or
with a with 9V 600mA games adapter with a positive
centre . Only use batteries or adapter of the same or
equivalent types as recommended.
Battery installation
1. Open the battery compartment located
under the CD player using screwdriver.
2. Insert 6 X ‘C’ size (UM-2) batteries according
to the polarity indicated in the bottom of the
compartment.
. Close the battery compartment.
Do not use rechargeable batteries.
Non-rechargeable batteries are not to be recharged. Recharge
able batteries are to be removed from the toy before being charged.
Rechargeable batteies are only to be charged under adult supervision.
Different types of batteries or new and used batteries are not to be
mixed. Only batteries of the same or equivalent type as recommened
are to be used. Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the toy. The supply
terminals are not to be short circuited. Do not throw batteries into a
fire. Remove the batteries if you are not going to use the game for a
long period of time.
WARNING: If the unit malfunctions or receives an electrostatic shock,
switch the unit off and on again using the POWER button. If this proves to
be ineffective, remove the batteries and/or perform the Reset procedure.
Adapter
This game also works with a 9V 600 mA game adapter , with positive
centre .
To connect to the mains, follow these instructions:
1. Check that the CD player is switched off.
2. Insert the DC plug, at the end of the AC adaptor cord into the DC input
jack, at the back of the unit.
. Plug the other end of the adaptor in an AC 20V – 0Hz power outlet.
A power adaptor is not a game. Switch off the power adaptor if you are
not going to use the game for a long period of time, this will avoid
overheating. While the game is powered by a power adaptor, do not play
with it outdoors. Check regularly the condition of the power adap tor and
its leads. If the latter becomes deteriorated, do not use them until they
are fully repaired. This game is not suitable for childrenunder  years old.
The game should only be used with the recommended power adaptor.
+
+
1. Locations where the temperature is high. The unit’s cabinet could
bend or the unit could be damaged if placed in direct sunlight, near
heaters (where the temperature is 60
o C (10 o F) or greater) or in cars
with the windows closed (in summer, the temperature may get higher
than 110
o C (212 o F).
2. Use the unit within a temperature range of  o C (1 o F) to  o C (9 o F).
. In humid or dusty places.
. In locations exposed to strong vibrations.
. On unstable or tilted surfaces.
LOCATION OF CONTROLS
Please refer to the image at the back of the cover page.