Lexibook DMP20BB/DMP23BB - Manual (Page 5)


English English

Software installation for users of Windows 98
If your operation system is Windows 98, you will first need to install
the flash drive before connecting the MP3 player to your PC.
1. Insert the Windows Installer driver CD into the CD-ROM drive of
your PC.
2. The driver will be automatically installed.
First steps
1. Remove the static label from the unit’s LCD screen.
2. Insert 1 x AAA battery into the battery compartment observing the
correct polarity (+/- signs).
3. Plug the earphones in the earphone socket.
4. Remove the USB cover. Connect the USB connector to the USB
socket of your computer. You can also use the USB cable provided if
necessary. “READY” will be displayed on screen. Then, your PC will
automatically search the movable hard disk.
5. Double click on the new drive (MSCN) which appears in “My
computer”. Copy your music files (MP3/WMA) into that directory.
6. When all your music files have been copied, right click on the
plug-and-play icon located in the lower right corner of your computer’s
screen. When the “Safely Remove Software” dialogue box appears,
click on STOP.
7. Disconnect the USB connector from the USB socket.
Notes:
- Improper operation may cause the program to stop. Any improper
operation method may delete some files.
- The manufacturer is not responsible for any damage caused by
mishandling and non compliance of the instructions given in this user
guide.
- Warning! Please format this unit by FAT! Don’t format by FAT32.
- Because the internal F/W takes some space, the actual memory
may be smaller than the labelled space.
Turning the unit On/Off
Press the key to turn the unit on. Press and hold STOP ( key)
to turn the device off. The device will also power on automatically after
you unplug the USB cable.
Note: this unit has an automatic power off feature when it is in STOP
mode.
Low battery indicator
When the battery is low, the icon will be displayed on the LCD
screen. Turn off the device and replace the battery.
Reset
WARNING: If the unit malfunctions or receives an electrostatic shock,
switch the unit off and on again using the button. If this proves to
be ineffective, remove the batteries and insert them again.
Hold function
To disable all the keys, push the Hold switch towards the left;
“LOCKED” will be displayed on screen.
Listening to music
Playback/Pause/Stop
1. After you turn on the unit, the last song played will be displayed.
2. Press to play all your tracks. Press again to pause the current
track. Press once more to resume playback.
3. Press STOP ( key) to cancel playback.
Searching tracks
1. In play mode, press to go back to the beginning of the track
currently playing. Press again to select the previous track.
2. In play or stop mode, press to select the next track.
Fast forward and backward
In play mode or pause mode, press and hold or to rewind or
fast forward the track currently playing.
Adjusting the volume
Use the + (volume up) or - (volume down) key to adjust the volume.
DMP20BBIM0287.indd 5 7/18/07 3:59:29 PM