Lexibook K11SP - Manual (Page 16)

English
16
HEADPHONES CONNECTION
Plug any normal headphones (not included) with a 3.5mm jack plug into the headphones jack located
at the back of the unit. When the headphones are in use, the speakers are turned off.
CAUTION: Too high volume, especially when using headphones, can damage your hearing. For this
reason, please turn the volume down before connecting the headphones.
RADIO OPERATION
1. Slide the function selector to the radio position to turn the unit on.
2. Slide the band selector to select AM, FM ST (stereo) or FM Mono for the desired radio band.
3. Use the tuning control to select the desired radio station.
4. Adjust the volume control.
5. To switch off the radio, slide the function selector to the POWER OFF position.
Note: To ensure maximum FM tuner sensitivity, the FM wire antenna should be fully extended to
obtain the best possible reception. Avoid close proximity to the speakers and other electrical
appliance. For FM stereo reception, the FM stereo indicator will light steadily when a stereo program
is being received. When tuning in AM reception, to ensure best AM sensitivity, try repositioning the unit
until the best reception is obtained.
1. Volume control
2. LED display
3. Power indicator
4. FM Stereo indicator
5. Function selector (CD/ RADIO/ AUX/ POWER OFF)
6. Left speaker
7. Right speaker
8. Repeat indicator
9. Play indicator
10. Microphone volume control
11. Microphone ON/OFF switch
12. Microphone
13. CD door
14. FM antenna
15. Carrying handle
16. Stop button
17. F.FWD button
18. PLAY/PAUSE button
19. Radio scale
20. REW button
21. Program button
22. Repeat button
23. Microphone jack
24. Band selector (AM/FM ST. /FM MONO)
25. AC jack
26. Battery compartment
27. Headphones jack
28. LINE OUT jack
29. AUX IN jack
30. Tuning control