Lexibook DVDP1 VA07 - Manual (Page 13)

13
English
DVD settings
System setup
The portable DVD player provides four setting menus: ‘System’, Language’, ‘Standby’,
and ‘Video’.
1. To enter the setting menus page, press the SETUP key.
2. Use the / keys to select a menu.
3. Use the direction keys to navigate through the menus and select the available options.
Press the ENTER key to confirm your settings.
4. To exit, press the SETUP key at any time.
TV System
1. Use the / keys to select ‘TV System’ and press .
2. Use the / to select:
PAL – Use this setting if you have a TV with PAL (phase alternating line) system.
NTSC – Use this setting if you have a TV with NTSC (national television system commit-
tee) system.
3. Press the ENTER key to confirm.
Power Resume
Select this option to turn the last memory on or off.
1. Use the / keys to select ‘Power resume’ and press .
2. Use the / to select ‘On’ or ‘Off’.
3. Press the ENTER key to confirm.
Note: By default, this option is off.
TV Type
1. Use the / keys to select ‘TV Type’ and press .
2. Use the / keys to select:
• ‘4.3LB’ – Use this setting if you have a normal TV to display a wide-screen picture.
• ‘4.3PS’ – Use this setting if you have normal TV with a non-wide-screen picture.
• ‘16:9’ – Use this setting if you have a wide-screen TV.
3. Press the ENTER key to confirm your selection.
Step
1. Press the STEP key once to pause the video. Press this key again to move one video
frame up. (The video is in pause mode the whole time.)
2. To resume, press PLAY.
Return
Press this key to back to a previous page/option.
Program
To program the order of play:
1. Press the PROGRAM key.
2. Use the numeric keys to enter the title and chapter for a DVD, or just the chapter for a
VCD or an audio CD.
3. Use the direction keys to move to the next setting.
4. Select ‘Play’ to start playing the programmed order and press the ENTER key to con-
firm. (If you select ‘Clear Program’ the player will use the order of play on the disc.)
DVDP1_07IM1353_30Aug_V09.indd 13 30/08/2013 4:19 PM