Lexibook DJ050 Series - Manual (Page 21)

20 21
ENGLISH
Click ‘Install AP’ on the ‘Digital Camera
Install Menu’ window and select a
language from the drop down list.
INSTALLING A MEMORY CARD
Please refer to image C.
Your digital camera has a limited built-in memory of 16MB (1 picture / no
video). Insert a SD card (8GB maximum, not included) to increase the
memory size of the camera.
1. Turn the camera off.
2. Push the SD card firmly into the SD slot until you hear a ‘click’ sound. Turn
the cameral on and should appear.
Note:
• When an external memory card has been inserted in the camera, all
photos/videos taken will be stored on the external memory card.
• To remove the card, push it in slightly to release it from the slot.
IMPORTANT NOTE: It is highly recommended to add a SD card to
increase the storage capacity of the unit.
INSTALLING THE SOFTWARE AND THE CAMERA DRIVER
Follow these instructions to install the ‘PhoTags Express’ and ‘Webcam
Express’ software and the camera driver on your computer system.
1. Insert the CD Software (included) into your CD-ROM drive. The CD will
auto run, and the installation menu will appear.