Lexibook DJ048 Series - Manual (Page 19)

18 19
ENGLISH
Q: Why are my pictures unclear?
A:
1. The lens may be dirty. Gently blow any loose dust from the lens. Then
breathe gently on the lens and wipe it with a soft, clean cloth that has no
chemicals on it.
2. Make sure you hold the camera steady until after the red LED light has
gone out.
3. You may be too close to your subject. Try moving further away.
Q: Why are my pictures too dark?
A:
You may need to move closer to your subject or your subject may need to
move to a lighter area.
Q: Why does the camera turn off automatically?
A:
1. Your batteries may be low. Place new batteries in your camera.
2. After 3 minutes of inactivity, your camera goes into power saving mode.
Press the “POWER” button and see if it turns on.
Q: I have taken photos but my computer does not recognize my
camera. What do I do?
A:
1. Ensure that you have in fact taken photos. Press the SHUTTER button
a few times to take some sample photos and then try downloading them
again.
2. Always use the USB cable that came with the camera. Make sure it is
firmly connected to the camera and the computer.
3. Give your computer time to recognize the USB connection device. Try
refreshing the device options list until you see the removable device
appearing. If the computer does not recognize your device, check the
‘Specifications’ section to see if your computer meets the system
requirements.