Lexibook DJ033 Series - Manual (Page 20)

English
20
SELECTING THE CAMERA FREQUENCY
A higher frequency increases the camera shutter speed so the effect of light
fluctuations from sources such as florescent lamps are reduced.
1. In camera mode, press the Menu button (9) to enter the settings menu
(the battery level, resolution, photo quality and the number of
photos/videos left to take are displayed on the screen).
2. Press the Down/Flash button (10) and then the Menu button (9) until the
‘Frequency’ icon appears.
3. Use the Up/Playback button (6) to select the 50Hz or 60Hz.
4. Press the Down/Flash button (10) to confirm your choice.
SELF-TIMER (CAMERA MODE ONLY)
1. In camera mode, press the Menu button (9) to enter the settings menu.
2. Press the Menu button (9) until the ‘Video’ icon appears, then press
the Shutter button (1) within 5 seconds to start the video capture.
3. Press the Shutter button (1) again to stop the video capture and save it in
AVI format.
Note:
• The flash function is disabled in video mode.
• To watch the videos, you must transfer them to your computer (see the
‘Downloading your photos and your videos’).
• The videos will be saved in AVI format. You can use Media player and
Quick time to play them (there is no sound for the video clips).
• The video clips’ length may change according to the memory space avail
able on the camera’s built-in memory or on the SD card.
TAKING 3 PHOTOS IN RAPID SUCCESSION
1. In camera mode, press the Menu button (9) to enter the settings menu.
2. Press the Menu button (9) until the ‘3 shots’ icon appears.
3. Press the Shutter button (1) within 5 seconds to start taking the photos.
The camera will then take 3 photos in rapid succession and beep each
time a photo has been taken.
DJ033seriesIM1210.indb 20 25/05/2010 6:31