MoTeC VCS - Manual (Page 10)

6 Installation
Updating VCS Manager Software
• Software updates are available to give access to the latest features.
Follow the software installation instructions to download the latest software
version from the website and update to this version.
• To update the associated firmware in the device, click VCS in the main
VCS Manager window. See Firmware Versions and Updating for more
details.
Connecting the VCS to a PC
The VCS connects to the USB port on the laptop with the mini-USB to USB
cable (USB 2.0 compatible).
The first time you connect the VCS to your laptop, the operating system will
detect the new hardware and launch the New Hardware Wizard. This will
automatically detect and install the driver.
If automatic detection fails, specify the location of the driver as C:\Program
Files\MoTeC\VCS Manager.
Once the driver installation is finished, the VCS hardware is ready to use.
i2 Pro Data Analysis Software
i2 Pro data analysis software can be used to analyse the video in conjunction
with the logged data recorded in the Data Logger or ECU. Any number and
combination of graphs, gauges and reports can be analysed simultaneously.
The i2 Pro environment can be customised to specific user requirements.
Note: Video footage can be manually aligned with logged data from both an
ECU or a Data Logger. Automatic video synchronisation is currently
supported for ADL3 and SDL Data loggers and requires the VSM (Video Sync
Module).
Contact your dealer for more information.