Rectifying faults, After-sales service, To book an engineer visit and product advice – Neff T93T42N2MK User Manual

Page 35

Advertising
background image

35

Rectifying faults

Malfunctions often have simple explanations. Please read the

following notes before calling the after-sales service.

After-sales service

Our after-sales service is there for you if your appliance should

need to be repaired. We are committed fo find the best solution

also in order to avoid an unnecessary call-out.
E number and FD number:
Please quote the E number (product number) and the FD

number (production number) of your appliance when

contacting the after-sales service. The rating plate bearing

these numbers can be found on the appliance certificate.
Please note that a visit from an after-sales service engineer is

not free of charge, even during the warranty period.
Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest assured that

the repair will be carried out by trained service technicians

using original spare parts for your domestic appliance.

Indicator

Fault

Action

Blank

There is no power supply.

Check the household fuse for the appliance. Check whether there is a power

cut by trying other electronic appliances.

is flash-

ing

The controls are damp or an object is

resting on them.

Dry the controls or remove the object.

“§„‰

Twist knob not centred in the twistpad. Place the twist knob in the centre of the twistpad.

Ҥ

+

number

Electronic fault.

Switch the appliance off and back on again after about 30 seconds using

either the household fuse or the circuit breaker in the fuse box. Contact the

after-sales service if this appears in the display again.

”ƒ

The electronics have overheated and

have switched off the corresponding

hotplate.

Wait until the electronics have cooled down sufficiently. Then touch a control

for the hotplate.*

”…

The electronics have overheated and

have switched off all hotplates.

Wait until the electronics have cooled down sufficiently. Then touch any con-

trol.*

”‰

The hotplate was in operation for too

long and has switched itself off.

You can switch the hotplate back on again immediately.

* Do not place hot pans close to or on the control panel

GB

0844 8928989

Calls from a BT landline will be charged at up to

3 pence per minute. A call set-up fee of up to 6 pence

may apply.

IE

01450 2655

Advertising