Tuff Stuff RCB-355 Seated Calf Bench - Manual (Page 2)

A
bout the RCB-355 Seated Calf Bench
Congratulations on your new purchase of the Seated Calf Bench.
We hope you are completely satisfi ed with this product and wish
you many years of enjoyment.
T
uffStuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will not
occur during shipment. The Home Lifetime Warranty and signature
indicating fi nal inspection has been conducted by our line foreman,
is an expression of our confi dence in the completeness, the
materials, and workmanship of this product.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on fi le with our factory,
be sure to complete the warranty registration card and send it to
TuffStuff Fitness Equipment today.
P
rior to the Assembly of the Seated Calf Bench
We advise you to consult your local TuffStuff retailer if you should
have a question or problem regarding the proper assembly of this
unit.
T
ool Requirements
One 7/8” combination wrench 1.
One 3/4” combination wrench 2.
One 9/16” combination wrench 3.
One 1/2” combination wrench 4.
One ratchet 5.
One 3/4” socket 6.
One 9/16” socket 7.
Rubber Mallet 8.
Windex or household glass cleaner 9.
Measuring tape 10.
Utility knife 11.
SC
RE
W
W
ID
TH
W
AS
HE
R
DI
AM
ET
ER
NU
T D
IA
ME
TE
R
SC
RE
W
LE
NG
TH
Hardware Measurement Diagram
Note: Due to continuing product improvements, specifi cations and designs are subject to change
without notice.
S
pecifi cations
1. Maximum Wt. Capacity - 300 lbs.
2. Total Machine Weight - 112 lbs.
3. Footprint (LWH) - See Front Cover.
2 RCB-355 Seated Calf Bench
Introduction
Step 1 Assembly List
Item # Description Qty.
1 FRONT FRAME 1
2 MAIN FRAME 1
3 REAR BASE FRAME 1
24 PLASTIC ELLIPTICAL SHOE 4
26 HEX HEAD CAP SCREW 3/8-16 X 5 4
27 HEX HEAD CAP SCREW 3/8-16 X 3 2
32 FLAT WASHER SAE 3/8” 12
33 NYLON INSERT JAM LOCK NUT 3/8-16 6