Tuff Stuff RHL-305WS High/Low Pulley W/200 lbs. Steel Wt Stack - Manual (Page 2)

A
bout the RHL-305WS High/Low Pulley W/200 Lbs Steel Wt
Stack (for RPR-265)
Congratulations on your new purchase of the High/Low Pulley
W/200 Lbs Steel Wt Stack (for RPR-265). We hope you are
completely satisfi ed with this product and wish you many years of
enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will not
occur during shipment. The Home Lifetime Warranty and signature
indicating fi nal inspection has been conducted by our line foreman,
is an expression of our confi dence in the completeness, the
materials, and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on fi le with our factory,
be sure to complete the warranty registration card and send it to
TuffStuff Fitness Equipment today.
P
rior to the Assembly of the High/Low Pulley W/200 Lbs Steel
Wt Stack (for RPR-265)
1. We advise you to consult your local Tuff Stuff retailer if you should
have a question or problem regarding the proper assembly of
this unit.
T
ool Requirements
1. One 7/8” combination wrench
2. One 3/4” combination wrench
3. One 9/16” combination wrench
4. One ratchet
5. One 9/16” socket
6. One rubber mallet
7. Windex or household glass cleaner
8. Measuring tape
9. Utility knife
SC
RE
W
W
ID
TH
W
AS
HE
R
DI
AM
ET
ER
NU
T D
IA
ME
TE
R
SC
RE
W
LE
NG
TH
Hardware Measurement Diagram
Note: Due to continuing product improvements, specifi cations and designs are subject to change
without notice.
S
pecifi cations
1. Maximum Wt. Capacity - 200 lbs.
2. Total Machine Weight - 283 lbs.
3. Footprint (LWH) - See Front Cover.
2 RHL-305WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-265)
Step 1 Assembly List
Item # Description Qty.
2 ADJUSTABLE FOOT SUPPORT 1
3 BOTTOM ASSEMBLY HOLDER 1
16 BLACK NYLON PULLEY 3/8 X 1 X 3 1/2 2
25 FLAT WASHER SAE 3/8” 8
28 HEX HEAD CAP SCREW 3/8-16 X 1 3/4 2
32 HEX HEAD CAP SCREW 3/8-16 X 5 2
33 HEX HEAD CAP SCREW 5/16-18 X 3/4 1
42 NYLON INSERT JAM LOCK NUT 3/8-16 4
Introduction
25
25
33
42
3
25
25
42
2
42
25
32
28
16
42
25