Actiontec GT701D User Manual - Manual (Page 70)

67
Appendix B Setting up Static IP on a Computer
12. Enter the following numbers in the “Subnet mask” text box:
255.255.255.0
Press the space bar on the keyboard to add the periods between the numbers.
13. Enter the following numbers in the “ Default gateway ” text box:
192.168.0.1
Press the space bar on the keyboard to add the periods between the numbers.
14. Click OK. The “Internet Protocol ( TCP/IP ) Properties” window disappears.
15 In the “Local Area Connection Properties” window, click OK. The Local Area
Connection Properties window disappears.
16. Click Close in the Local Area Connection Status window. The window disap-
pears.
17. Close the Network and Dial-up Connections window by clicking on the “x”
button at the upper right corner of the window.
The computer is now set up with a static IP address, allowing the user to access the
Modem’s GUI .