Actiontec SG200 Installation Guide - Manual

B
Connect to the Gateway Device and Home Network Router
A
See What’s Included
Step
1
Plug one end of the
Ethernet cable to the Gateway
Device’s Ethernet port.
Flip this Installation Guide over to continue
Step
2
Plug the other end of
the Ethernet cable into the
LAN port on the back of your
Home Network Router.
Before installing your new Gateway Device please
ensure that the following items are in the box.
Step
3
Plug the AC Power
Adapter connector to the
Gateway Device’s Power port.
Step
4
Now plug the Power
Adapter into a properly
grounded power outlet.
Gateway Device Model# SG200
Power Adapter
Ethernet Cable
NEXT
VerizonSG200_Install Guide13_spclsize_arial 4/14/11 10:40 AM Page 1