C.E. Niehoff & Co. C706:A9-4029 Regulator Harness Replacement - Manual

II169B
Page 1 of 3
A9-4029 Regulator Wiring Harness Assembly
for C706 Alternators
Replacement Instructions
Figure 1 — Gray Field Connector Attached to
Housing with Clip
This kit contains a new wiring harness with a larger-sized connector assembly than what it
may be replacing. Remove front cover of control unit.
Clip
Wire
tie
Figure 2 — Gray Field Connector Secured with
Wire Ties Only
If gray fi eld connector
is attached
to the housing with a clip:
If gray fi eld connector
is secured
with wire ties only:
 
START ON
PAGE 2
START ON
PAGE 3
These instructions should be used in place of
harness replacement instructions
in 700 Series Service Manual SM7