C.E. Niehoff & Co. N1241-1 Alternator/N3208 Regulator Installation - Manual

II0104A
Page 1 of 2
N1241-1 Alternator / N3208 Regulator
Installation Instructions
OEM Wiring Connections
N1241-1
Alternator
Figure 1a – N3208 Regulator Wiring Connections
Figure 1– N1241-1 Alternator
T
Lock washer T
Washer T
Screw –
Torque to 8.5 Nm/75 lb.in. T
Lock washer
T
Washer T
Screw –
Torque to 8.5 Nm/75 lb.in.
T
E Terminal:
Torque locknut to 3.4 Nm/30 lb.in.
T
R Terminal:
Torque locknut to 3.4 Nm/30 lb.in.
Top Mounting Bolt on alternator,
3/8 SAE Grade 5 min.;
torque to 28 Nm / 20 lb. ft.
Bottom Mounting Bolt on alternator,
1/2 SAE Grade 5 min.; torque to 65 Nm / 88 lb. ft.
Slip bushing
Install N1241-1 alternator/N3208 Regulator per diagrams
on pages 1 and 2.
T
T
T T T