Carolina 2816K PERIMETER WORKSTATION User Manual
Page 7
Advertising
- 7 -
9. Outline the top of the base unit with the silicone seal and place top on the unit. Make sure silicone is
applied in between tops were one top butts against another. Be sure to center the top on the base unit
before the silicone dries. Do not apply adhesive to filler panels shown below, doing so will
prohibit access to utilities connections.
10. Clean the top with water only. Be sure the top is clean and dry before installing the backsplash. Using
silicone adhesive, glue the epoxy back splash to the back of the top.
11. Put a bead of silicone seal along the cutout for the sink on the top. Lower sink in place.
Advertising