Carolina PLAIN APRON TABLES - Manual (Page 5)

[5]
3. Apply a lock washer and a 5/16” nut onto each stud bolt. Tighten each nut using a
minimum of 12 foot-pounds but not exceeding 17 foot-pounds of torque.
4. Slide leg boots onto the legs with the flared end toward the bottom of the leg.
5. Screw leg levelers into t-nut in the bottom of the leg.
6. Turn the table over so the top is up. Set your table in place and adjust the leg
levelers to level the table.
7. Slide the leg boot down to the floor.
8. NOTE: TABLES WITH LEG BRACES AND STRETCHERS SEE
FIGURE 8A.