AB Soft Megatouch Gametime PM0503-10 - Manual (Page 5)

COPYRIGHT © 2006 MERIT ENTERTAINMENT
Site Preparation
In determining the location for your
Megatouch Gametime™ video game, con-
sideration must be given to a suitable,
grounded electrical outlet. Since the game
is a computerized device, it should be con-
nected to a separate grounded circuit. If a
separate circuit is not available, care should
be taken to provide a clean and constant
voltage. As a basic guideline, never con-
nect the unit to a circuit that also supplies
power to freezers, coolers or other high
power consuming and electrical noise-gen-
erating equipment. Place the game in a loca-
tion where nothing will interfere with proper
ventilation. The game should not be exposed
to any dripping or splashing liquids. Objects
filled with liquid should not be placed on the
unit.
WARNING - To reduce the risk of fire or
electric shock, do not expose this ap-
paratus to rain or moisture. The power
cord on the rear of the unit is the dis-
connect device and must remain
readily accessible after installation.
FIGURE 1 - REAR VIEW
PM0503-10 MEGATOUCH GAMETIME OWNER’S MANUAL 2
Setting up your Game
1. After removing the game from the car-
ton, plug the game into a standard AC
outlet.
NOTE: All packaging materials should
be retained in the event the game needs
to be sent in for service.
2. Turn the power switch at the back of
the game to ON and wait for comple-
tion of the boot-up sequence. The game
will display the Player Menu Screen.
3. The machine has been preset at the
factory and therefore should not need
to be adjusted; however, it is recom-
mended that the screen be calibrated
(see Touchscreen Calibration).
4. There are many custom settings avail-
able for the game. To customize the
settings, follow the software instruc-
tions in this manual.
THUMBSCREWS
SECURING
CONTROL BOARD
COMPARTMENT
POWER
SWITCH
ETHERNET
COUPLER
KEYBOARD
PORT
USB PORT