Abocom 802.11b/g Portable Router WAP2102 User Manual
Page 33
30
Using DHCP
• To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. Using this is recommended. By default, the Wireless Router
will act as a DHCP Server.
• Restart your PC to ensure it obtains an IP Address from the Wireless Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
• Enter the Wireless Router's IP address in the Default gateway field and click OK. (Your
LAN administrator can advise you of the IP Address they assigned to the Wireless Router.)
• If the DNS Server fields are empty, select Use the following DNS server addresses, and
enters the DNS address or addresses provided by your ISP, then click OK.
Checking TCP/IP Settings - Windows XP
1.
Select Control Panel - Network Connection.
2.
Right click the Local Area Connection and choose Properties. You should see a screen
like the following:
3.
Select the TCP/IP protocol for your network card.