ASA Electronics LCM1042TV - Manual (Page 16)

-15-
Troubleshooting
PROBLEM SOLUTION
Poor TV Reception • Perform auto programming of
the tuner
• Verify antenna condition.
• NOTE: Due to the nature of TV
signals, vehicle motion,
direction the vehicle is facing,
distance from the transmitter,
nearby surroundings and
weather may adversely affect
TV reception. These
conditions may result in the
following: picture roll, “snowy”
picture, or momentary loss of
color. Please refer to page 2
for more information on TV
reception.
Poor radio reception (FM
modulator installed) • Check the condition of the
vehicle’s radio antenna.
• Verify that the antenna is fully
raised
• If a wired RF modulator has
been installed, verify that it’s
switch is turned to the off
position
No power to LCD • Verify +12VDC on red wire at
power harness going to the
video pod. Verify ground
connection.
Power but no video or
sound • Verify connections at both
ends of source component
harness.
IR sensor inoperative • Verify that the batteries in the
remote are fresh
• Verify that the remote eye is
not obstructed.
• Verify that the infrared
transmitter is affixed over the
sensor eye of the component
to be controlled
Specifications
Operation Temperature -10°C~ 65°C
Storage Temperature - 40°C ~ 85°C
Video Display System NTSC
Audio Output 0.6W @ 16Ω
Current Draw 2A
Weight 5.3 Lbs.
Overall Dimensions 2.2 x 11 x 11.2 Inch
(H x W x D)