J&M 1050-18D - Manual (Page 21)

21
ELECTRONIC WEIGH SCALE SYSTEMS
FOR GRAIN STORM 1050-22D
# Part # Description Qty
1 278WB-2 2-7/8" Hitch Weigh Bar with cable 1
2 375WTS Weigh Spindle with cable 4
3 EZ-2000 Indicator Box with mounting plate 1
4 JB-2 Junction Box (5 pt.) for Tracks 1
5 PC-1 Power Cord (to battery) 1
6 ECI-1 Extension Cord (to mount in tractor cab) 1
7 37605SA Seal (Hub) 2
8 ATP-375 Adapter Tubing Pipe 4
9 MBI-1 Mounting Bracket for Indicator 1
10 WBW-278 Weigh Bar Weldment 1
11 BB-2 Battery Box with strap 1
12 343-BWN 3/4" x 3" Bolt (G8) w/ hvy lock washer, nut 4
13 MB-58612 5/8" x 6 1/2" Bolt (G5) with nut 2
14 MB-381 3/8" x 1" Bolt with nut 6
15 PB-10 #10 Pan Bolt with nut 4
NOTE:
When inserting both the weigh
spindles or the hitch weigh
bar, be sure that the TOP of
the spindle is in the upright
position as indicated by the
decal on each weigh bar.
Failure to correctly align the
weigh bar and spindles in the
upright position will cause the
scale system to read with
greater inaccuracy.
Scale System Parts List (Digi-Star System)