J&M 1050-18S - Manual (Page 3)

3
1050-18S GRAIN CART
SPECIFICATIONS
DIMENSIONS
A)
1’-9”
B) 18’-10”
C) 8’-6”
D) 22’-0”
E) 29’-7”
F) 13’-6”
G) 6’-4”
H) 12’-0”
I) 1’-2”
J) 2’-3”
K) 9’-6”/10’-0”
L) 11’-9”
M) 10’-11”
Note: Specifications are subject to change without notice or obligation
* Bushel capacities measured with #2 corn at 15% moisture (56 lb test wt.)
**Time varies with rpm and moisture content of grain
GENERAL INFORMATION
TO THE OWNER:
The purpose of this manual is to assist you in operating and maintaining your grain cart in a safe manner. Read
it carefully. It furnishes information and instructions that will help you achieve years of dependable performance
and help maintain safe operating conditions. If this machine is used by an employee or is loaned or rented,
make certain that the operator(s), prior to operating:
1. Is instructed in safe and proper use.
2. Reviews and understands the manual(s) pertaining to this machine.
Throughout this manual, the term IMPORTANT is used to indicate that failure to observe can cause damage to
equipment. The terms CAUTION, WARNING and DANGER are used in conjunction with the Safety-Alert
Symbol, (a triangle with an exclamation mark), to indicate the degree of hazard for items of personal safety.
When you see this symbol, carefully read the message that follows and be alert to the possibility of personal
injury or death.
This Safety-Alert symbol indicates a hazard and means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Indicates an imminently hazardous situation that, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, could
result in death or serious injury, and includes hazards that are
exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury.
Indicates that failure to observe can cause damage to equipment.
Indicates helpful information.
SPECIFICATIONS
Capacity
1050 bushels
Auger, one vertical 18” diameter
Wheels 31x32 or 32x36
Hubs 10 bolt
Spindles 6” diameter
Weight (approx.) 13,100#
PTO 1,000 rpm
Tire Size 35.5x32, 20 ply or
73x44:00, 16 ply
Tongue Weight:
Empty
2,900 lbs
Loaded 4,200 lbs
Construction:
Hopper
12 GA Steel
Undercarriage 8” x 4” x 1/2” Tubing
Axle 7” x 7” x 1/2” Tubing
Unloading Time** 2.4 minutes (approx.)