J&M GC-31T Assembly - Manual (Page 38)

GC31
t
-1 G
rain
C
art
a
ssembly
-38-
STEP - 74
STEP - 73
Install the driveshaft assembly with (16) M16
x 45 MM bolts and locknuts without flanges.
Only use washers on bolts and nuts for end of
plates that bolt onto the main frame weldment.
Attach the universal joint with a 5/8” x 3” hex
head bolt and lock nut.
Install front leg support
braces. Use (12) M16 x 45
hex head bolts, (12) M16
washers, and (12) M16
nylon locking nuts.
Use (2) M30 x 120MM
bolts and (2) M30 Nuts to
attach the front leg support
brace to the front leg.