J&M Storm Tracker 2 Track system (2011 & newer) - Manual (Page 11)

11
Installation
Step 4 - Slide the tracks onto the spindle.
Step 5 - Slip the 6” Rubber O-Ring onto the spindle, pushing it up against the track spindle.
Step 6 - Install the Track Spindle Collar. Use a 1” x 9” Hex Bolt and a 1” Centerlock Hex Nut to fasten the
Collar to the Spindle.
Step 7 - Tighten all of the hardware according to the Bolt Torque Chart located at the beginning of the
manual.
FRONT
REAR