Chapter 4. using the mplab® c17 c compiler, 1 introduction, 2 highlights – Arizona Picdem 17 User Manual
Page 29: Chapter 4, Using the mplab, Introduction, Highlights, Picdem™ 17 demonstration board user’s guide, Chapter 4. using the mplab, C17 c compiler 4.1 introduction
2001 Microchip Technology Inc.
DS39024B-page 23
PICDEM™ 17 DEMONSTRATION
BOARD USER’S GUIDE
12
Chapter 4. Using the MPLAB
®
C17 C Compiler
4.1
Introduction
This chapter describes the files necessary to compile programs with the
MPLAB C17 C compiler to run on the PICDEM 17 demonstration board. A
sample linker script file, DEMO756.LKR, is described as well as other support
files.
4.2
Highlights
This chapter covers the following topics:
• Linker Script File, DEMO756.LKR
• Startup Code File, C0L17DEM.ASM
• Interrupt Code File, INT756LD.ASM
• Other Files
Note 1:
User should refer to MPLAB IDE document that shows project
setup, but special version of linker scripts, etc., are used here
because of the demonstration board requirements.
2:
Also, refer to the MPLAB C17 C Compiler User’s Guide
(DS51112) for additional information.