J&M 2494ST Running Gear - Manual (Page 3)

Pg. 3
MODEL 2494ST - 24 TON RUNNING GEAR
Specifications
Capacity 24 Ton
Weight (with tires) 2,800 lbs.
Width (c/c of tires) 92”
Spindle Size 3 3/8” diameter (sleeved)
Spring Balance Tongue Dual Spring
Ground Height (to top of axle) 26”
Rocking Bolster Built-In Rear
Tongue, Adj. Quick Hitch Standard
Adjustable Center Pole Standard
Pull Through Rear Hitch Standard
Hydraulic Brake System Four Wheel Drum
Wheels – 10 Bolt 22.5 x 13
GENERAL INFORMATION
TO THE OWNER:
The purpose of this manual is to assist you in operating and maintaining your running gear in a safe
manner. Read it carefully. It furnishes information and instructions that will help you achieve years of
dependable performance and help maintain safe operating conditions. If this machine is used by an
employee or is loaned or rented, make certain that the operator(s), prior to operating:
1. Is instructed in safe and proper use.
2. Reviews and understands the manual(s) pertaining to this machine.
Throughout this manual, the term IMPORTANT is used to indicate that failure to observe can cause
damage to equipment. The terms CAUTION, WARNING and DANGER are used in conjunction with the
Safety-Alert Symbol, (a triangle with an exclamation mark), to indicate the degree of hazard for items of
personal safety. When you see this symbol, carefully read the message that follows and be alert to the
possibility of personal injury or death.
This Safety-Alert symbol indicates a hazard and means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Indicates an imminently hazardous situation that, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, could
result in death or serious injury, and includes hazards that are exposed
when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, may result
in minor or moderate injury.
Indicates that failure to observe can cause damage to equipment.
Indicates helpful information.