Climax LM5200 LINEAR/GANTRY MILL - Manual (Page 5)

Tool ConfiguraTions
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 5
X-AXIS ELECTRIC
FEED ASSEMBLY
Y-AXIS ELECTRIC
FEED ASSEMBLY
MAIN BED
(X-AXIS TRAVEL)
RAM AND CROSS
SLIDE ASSEMBLY
(Y-AXIS TRAVEL)
SPINDLE DRIVE
MOTOR
MILLING HEAD
ASSEMBLY
(Z-AXIS TRAVEL)
MANUAL FEED
HANDWHEEL
Z-AXIS ELECTRIC
FEED ASSEMBLY
10 Hose and Pendant Cable Assemblies
Hose and Cable Kit 1/2 x 20 ft (609.6 cm) 65145
Hose and Cable Kit 1/2 x 50 ft (1524.0 cm) 65151
Hose and Cable Kit 1/2 x 100 ft (3048.0 cm) 65154
11 Stand Alone Feed Control
(Stand Alone Control Panel & Pendant with Cables)
NOTE: Not needed if using a Climax Hydraulic Power Unit
Tooling Voltage Cable Length Part Number
40 Taper 120V 20 ft (609.6 cm) 53398
50 ft (1524.0 cm) 53399
100 ft (3048.0 cm) 53400
230V 20 ft (609.6 cm) 53401
50 ft (1524.0 cm) 53402
100 ft (3048.0 cm) 53403
HSK 120V 20 ft (609.6 cm) 66425
50 ft (1524.0 cm) 66426
100 ft (3048.0 cm) 66427
230V 20 ft (609.6 cm) 66428
50 ft (1524.0 cm) 66429
100 ft (3048.0 cm) 66430
12 Electric Feed Assembly
NOTE: 230V Feeds not for use with Climax Hydraulic Power Units
Voltage Cable Length Part Number
120V 20 ft (609.6 cm) 64684
50 ft (1524.0 cm) 66310
100 ft (3048.0 cm) 66311
230V 20 ft (609.6 cm) 64743
50 ft (1524.0 cm) 66312
100 ft (3048.0 cm) 66313
13 Z-Axis Feed Adapter
Z-Axis Feed Adapter Kit - I Axis 40 Taper 64856
NOTE: Drawings are for reference only, are not to scale, and
may not represent actual product.