Climax BB5000 Drilling Accessories - Manual

BB5000 Drilling Accessories
BB5000 Drilling and Blind Hole Boring Accessories
The BB5000 Boring Bar makes a powerful drilling system. Mounting options
include cantilevered single arm or double arm bearing mounts and our Right
Angle Drill Base. For larger diameter holes you can step drill, use hydraulic or
servo motors, or use 120V or 230V single phase power by substituting the 4th
generation Heavy Duty 12:1 Rotational Drive Unit which is normally bundled
with the BB5000 Servo Motor.
To extend the life of drill inserts, we highly recommend using cooling mist from
our 60283 Coolant Mister and the RCA (Rotary Coolant Adapters) with either
Super Drills or AMEC drills.
We recommend the #4 Morse taper bars for most drilling and blind hole boring
applications. The majority of our drilling and blind hole boring tools are
supplied with #4 Morse taper. For increased versatility, order Morse taper bars
with 1-¼ inch (31.8 mm) straight shank bore on the opposite end.
Tooling options include the Showa Super Drill, Allied Machine & Engineering
(AMEC) Gen 2 T-A Spade Drills, and Criterion Boring Heads. Mounting
options include cantilever bearing mounts, the Right Angle Drill Stand or
customer fabricated mounts for BB5000 Bearings.
2011
BB5D
04