Hunter 55049 70 Fernwood - Manual (Page 15)

www.HunterFan.com
1.888.830.1326
Light Kit (continued)
See next page for fan
operation instructions.
Connect the appropriate pull
chain pendant to each of the short
chains coming from the finial
and finial cap. The fan pull chain
controls the speed: from high to
off. The light pull chain controls
the light fixture: on and off.
Press the globe and globe keeper
flush against the metal plate. Thread
the light pull chain through the hole
in the center of the finial cap and
thread the fan pull chain through the
hole in the side of the cap. Finally,
thread only the light pull chain
through the hole in the finial and
screw the finial onto the threaded rod.
Install a light bulb in each socket.
Note: Do not use CFL bulbs to
replace your light bulbs. Your
lights may flicker or fail to work.
Finial
Finial
Cap
Light
Pull
Chain
Fan
Pull
Chain
Globe
Keeper
Metal
Plate
Globe
Note: Globe style and number of
lights may vary.
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
may result in fire hazard or improper operation.
M0068-01 • 04/22/13 • © Hunter Fan Company
15