Light kit (continued) – Hunter 59085 48 Fanaway User Manual
Page 13
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
Make sure the light kit top housing is securely attached to the light kit mounting
plate. Failure to properly attach and tighten all three assembly screws could result in
the light kit top housing and light fixture falling.
Turn the light kit top housing counterclockwise
until the housing assembly screws are firmly
situated in the narrow ends of the keyhole
slots. Install the remaining screw into the
housing. Tighten all three screws firmly.
Screw
Holes
Connect the upper plug connector from the
motor to the lower plug connector in the light kit.
Note: Both plug connectors are polarized and
will only fit together one way. Make sure the
connectors are properly aligned before connecting
them. Incorrect connection could cause improper
operation and damage to the product.
13
M3531-01 • 05/14/14 • © Hunter Fan Company