CEMB USA ER85 (A) - Manual

I 1066 - 09/13 - Ver. 00
Use and maintenance manual GB
ENGLISH
General Index
1. FOREWORD 3
1.1 GENERAL 3
1.2 PURPOSE OF THE MANUAL 3
1.3 WHERE AND HOW TO KEEP THE MANUAL 3
1.4 MANUAL UPGRADES
3
1.5 COLLABORATION WITH USERS 4
1.6 MANUFACTURER 4
1.7 MANUFACTURER'S RESPONSIBILITY AND WARRANTY 4
1.7.1 Terms of warranty 4
1.8 TECHNICAL ASSISTANCE SERVICE 5
1.9 COPYRIGHT 5
2. MACHINE DESCRIPTION 6
2.1 PURPOSE 6
2.2 TECHNICAL SPECIFICATIONS 6
2.3 DIMENSIONS 6
3. STARTING 7
4. CONTROL PANEL AND COMPONENTS 10
4.1 AUTOMATIC DISTANCE AND DIAMETER GAUGE 10
4.2 SONAR DEVICE FOR AUTOMATIC WIDTH MEASUREMENT 10
4.3 TOUCH SCREEN 10
5 USE OF THE WHEEL BALANCER 11
5.1 INITIAL SCREEN 11
5.1.1 Screen-save screen 11
5.2 PRESETTING OF WHEEL DIMENSIONS 11
5.2.1 Automatic standard setting ( also Correction mode) 11
5.2.2 ALUS wheel automatic presetting (Adhesive weights) 12
5.3 USER CONTROL 13
5.4 RESULT OF MEASUREMENT 13
5.5 WHEEL LOCKING 13
5.6 EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE WITH CLIPS 14
5.7 “SPLIT” CONTROL (HIDDEN WEIGHT) 14
5.8 CORRECTION MODE 15
5.9 AUTOMATIC MINIMIZATION OF STATIC UNBALANCE 15
5.10 ECCENTRICITY MEASUREMENT 16
5.10.1 When and why matching 16
5.10.2 Presetting of tolerance on the machine 17
5.10.3 Value of static unbalance, correlated with eccentricity
17
5.10.4 Value of unbalance corresponding to eccentricity 17
5.11 WHEEL ECCENTRICITY MEASUREMENTS 17
5.12 ECCENTRICITY OPTIMISATION 18
6. MENU 19
6.1 MENU ACCESS DIAGRAM 19