CEMB USA ER80 (C) - Manual

I 1008_1009 - 04/12 - Rev. 01
Use and maintenance manual GB
ENGLISH
General Index
1. FOREWORD 3
1.1 GENERAL 3
1.2 PURPOSE OF THE MANUAL 3
1.3 WHERE AND HOW TO KEEP THE MANUAL 3
1.4 MANUAL UPGRADES 3
1.5 COLLABORATION WITH USERS 4
1.6 MANUFACTURER 4
1.7 MANUFACTURER'S RESPONSIBILITY AND WARRANTY 4
1.7.1 Terms of warranty 4
1.8 TECHNICAL ASSISTANCE SERVICE 5
1.9 COPYRIGHT 5
2. MACHINE DESCRIPTION 6
2.1 PURPOSE 6
2.2 TECHNICAL SPECIFICATIONS 6
2.3 DIMENSIONS AND WEIGHTS 6
3. STARTING 7
4. CONTROL PANEL 10
5 USE OF THE WHEEL BALANCER 11
5.1 PRESETTING OF WHEEL DIMENSIONS 11
5.1.1 Automatic width 11
5.1.2 Modifying set dimensions 12
5.1.2.1 Standard correction method 12
5.1.2.2 Correction method with adhesive weights (ALU) 12
5.1.3 Static & combined modes 12
5.2 MEASUREMENT RESULT 13
5.3 EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE WITH CLIPS 13
5.4 SPLIT FUNCTION (UNBALANCE RESOLUTION) 13
5.5 AUTOMATIC MINIMIZATION OF STATIC UNBALANCE 14
6. SETUP 15
6.1 MENU 15
6.2 UNBALANCE OPTIMISATION 16
6.3 SELF-DIAGNOSTICS 16
6.4 CALIBRATION 16
6.5 AUTOMATIC GAUGES CALIBRATION 17
6.5.1 Rim distance gauge 17
6.5.2 Diameter gauge 17
6.5.3 Width sonar (option) 18
7. DIAGNOSTICS 19