CEMB USA C72_2SE (B) - Manual (Page 10)

I 0226 - 10
1 2
4
7
3
8
5
6
9
10
11
12
13
14
17
20
23
26
25
24
22
21
19
16
15
18
GB
CONTROL PANEL AND DISPLAY
Fig. 7
1-2 Digital readouts, AMOUNT OF UNBALANCE, inside/outside
3-4 Digital readouts, POSITION OF UNBALANCE, inside/outside
5 Indicators, correction mode selected
6 User Indicators
7 Weight correction position indicators
8 Distance gauge position indicator
9 SPLIT “ON” indicator
10 OPT “ON” indicator
11 Measurements in mm indicator
12 ALUS “ON” indicator
13 Push button, operator selection
14 Push button, SPLIT (unbalance resolution)
15 Emergency push button
16 Push button, cycle start
17 OPT Pushbutton (unbalance optimisation)
18 HOME Pushbutton (terminate function)
19 Push button, FUNCTIONS MENU
20 Inch/mm dimensions selection pushbutton
21 Push button, eccentricity measurement selection (optional)
22 Push button, menu selection confi rmation
23 Push button, selection of mode of correction
24 Position repeater push button
25 Push button, unbalance reading < 5 g (25 oz)
26 Push buttons, manual DISTANCE/DIAMETER/WIDTH setting
Note: - Only use the fi ngers to press the push buttons. Never use the counterweight pincers or other
pointed objects.
- In case of audible alarm connected (see par. OPERATION FUNCTIONS MENU ), any
push button operation sounds with a “beep” alarm.