CEMB USA C71 (A) - Manual

I 293 - 1 GB
Instructions for use I
Table of contents Page
1 - GENERAL 3
1.1 - GENERAL SAFETY REGULATIONS 3
1.1.1 - STANDARD SAFETY DEVICES 3
1.2 - FIELD OF APPLICATION 3
1.3 - OVERALL DIMENSIONS 3
1.4 - TECHNICAL DATA 3
2 - HANDLING AND LIFTING 4
3 - STARTUP 4
3.1 - ANCHORING 4
3.2 - ELECTRICAL CONNECTION 4
3.3 - FLANGE MOUNTING 4
3.4 - WHEEL GUARD ASSEMBLY AND ADJUSTMENT (OPTIONAL) 4
3.5 - WD SPACER 5
4 - CONTROLS AND COMPONENTS 5
4.1 - AUTOMATIC DISTANCE AND DIAMETER GAUGE 5
4.2 - KEYBOARD AND DISPLAY 5
4.2.1 FUNCTION MENU MANAGEMENT 6
5 - INSTRUCTIONS FOR USE OF THE WHEEL BALANCER 7
5.1 - USING THE GAUGE INSTALLED ON THE MACHINE 7
5.1.1 - DATA SETTING 7
5.2 - AUTOMATIC PRESETTING 7
5.2.1 - STEEL OR ALUMINUM WHEEL RIMS. SPRUNG COUNTERWEIGHTS 7
5.2.1.1 - STATIC & COMBINED MODES 8
5.2.2 - RIMS WITH INTERNAL COUNTERWEIGHT 8
5.3 - MEASUREMENT RESULT 9
5.3.1 - MEASUREMENT PRECISION 9
5.4 - RECALCULATION OF THE UNBALANCE VALUES 9
5.5 - EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE WITH CLIPS 9
5.6 - SPLIT FUNCTION 10
5.7 - UNBALANCE OPTIMIZATION 11
5.8 - AUTOMATIC MINIMISATION OF STATIC UNBALANCE 12
6 - SET-UP 12
6.1 - AUTODIAGNOSTICS 12
6.2 - AUTOCALIBRATION 12
6.3 - MANUAL DIMENSION PRESETTING 13
6.3.1 - STEEL WHEEL RIMS 13
6.3.2 - ALU S RIMS 13
6.3.2.1 - ALU-S VARIANT WITH INSIDE CLAMP WEIGHT 14
6.4 - DISPLAY SAVER 15
6.5 - AUTOMATIC GAUGES CALIBRATION 15
6.5.1 - RIM DISTANCE GAUGE 15
6.5.2 - DIAMETER GAUGE 16
7 - ERRORS 17
7.1 - INCONSISTENT UNBALANCE READINGS 18
8 - ROUTINE MAINTENANCE 18
8.1 - REPLACING THE PROTECTION FUSES 18
9 - LIST OF RECOMMENDED SPARE PARTS 18