CEMB USA N600 - Manual (Page 4)

All of the data and characteristics mentioned in this catalogue
are purely indicative and do not constitute a commitment for our
company, which reserves the right to make any changes it may
deem necessary without any prior warning.
ASNE02120 01/14
Vibration analysis division:
phone +39 0341 706111
fax
+39 0341 706299
e-mail: [email protected]
CEMB S.p.A.
Via Risorgimento, 9
23826 MANDELLO DEL LARIO (LC) Italy
www.cemb.com
TECHNICAL DATA
FUNCTIONS:
• Measurement of the overall vibration value (acceleration, velocity, displacement)
• Vibration phase measurement
• Analysis of vibration in the frequency range
• Monitoring overall vibration in relation to time or velocity (Bode plot)
• Balancing of rotating bodies in operating conditions on 1 or 2 planes
• Waveform
MEASUREMENT TYPES
• Effective value (RMS)
• Peak value (Pk)
• Peak-to-peak value (PP)
UNITS OF MEASUREMENT
• Acceleration: [g]
• Velocity: [mm/s] or [inch/s]
• Displacement: [μm] or [mils]
• Frequency: [Hz] or [Cpm]
INPUT
• 2 independent and simultaneous measuring channels
(accelerometer, velocimeter, non-contact, any signal max. 5V-PP)
• 1 photocell channel (velocity and angle reference)
• 2 USB ports for data transfer
VIBROMETER FUNCTION
• Measurement of the overall vibration value in predefined frequency bands
(10-1000Hz; 3-300Hz; 10-10000Hz) or bands defined by the user
(within the range of 3-20000Hz)
• Measurement of 1x fundamental vibration value and phase
• Measurement of rotating body velocity
FFT FUNCTION (ANALYSIS IN FREQUENCY)
• FFT analysis (manual/trigger)
• Maximum settable frequency (25; 100; 500; 1000Hz; 2.5; 5; 10; 15kHz)
• Resolution (100; 200; 400; 800; 1600; 3200 lines)
• Number of averages: from 1 to 16
• List of main peak values
MONITOR – DATA LOGGER FUNCTIONS
• Recording and display of overall vibration trend over time
• Storage and display of vibration trend and phase when rotation velocity changes.
BALANCING FUNCTION
• Number of correction planes: from 1 to 2
• Graphic indicator of measurement stability
• Balancing procedure, guided step by step,
with option for editing and intermediate changes
• Vectorial breakdown of the unbalance
• Correction by adding or removing material
GENERAL CHARACTERISTICS
• Display: 7” colour LED-backlit TFT LCD
• A/D converter: 24 bit resolution
• Dimensions: approx. 225 x 200 x 50 mm
• Weight: 1.4 kg
OPERATING CONDITIONS
• Temperature: from -10° to +50° C
• Air humidity: from 0 to 95% without condensate
POWER SUPPLY
• Rechargeable 6Ah Lithium battery
• Charging time: < 5 hours (when battery is fully discharged)
• Power supply-battery charger for 100-240 V, 50/60 Hz (24 V, 1.5 A)
• Battery life: > 8 hours based on typical use
ITALIAN HEART:
All of the design
and production
is strictly MADE IN ITALY