CEMB USA M16 - Manual (Page 2)

CEMB S.p.A.
23826 MANDELLO del LARIO
TEL. (+39) 0341.706111
www.cemb.com
e mail: [email protected]
Div. Strumentazioni Via Risorgimento, 9
Fax (+39) 0341.7
06.299
Div. Garage Viale Costituzione, 28
Tel. (+39) 0341.700369
Fax (+39) 0341.700725
Training Center Viale Costituzione, 28
BB A L A N C I N G M A C H I N E S
Functioning
The M16 transducer picks up seismically the absolute vibrations of the
machine by being fitted directly to the vibrating part.
Technical characteristics
Type of measurement : seismic (absolute vibrations)
Dynamic range : ± 50 g - 0.1 Hz ÷ 10.0 Khz (± 3 db)
Direction of vibrations : any
Sensitivity : 100 mV/g
Transverse sensitivity : ‹ 5%
Accuracy : 0,0003 g
Resonance frequency : › 25 Khz
Protection against shocks : ± 7000 g-pk
Power supply : 2 ÷ 20 mA - 18 ÷ 28 V
Outlet impedance : ‹ 100 ohm
Temperature range : - 48°C ÷ + 121°C
External casing material : 316-L stainless steel
Mounting screws : M16 x 1.5
Weight :
20 g
Protection against external
agents :
CEI 70-1 standard, IP66 class
Connection : two wires shielded cable
Assembly
Make a threaded hole M16 x 1.5 the surface to be tested.
Maintenance
Zero.
Dimensions, fixture and connections
as per front page drawing.
ASTD08120