CHIEF TPS Series - Manual (Page 10)

TPS Series Installation Instructions
10
Removing the Display
WARNING: IMPROPER HANDLING CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Inadequate support
of display while removing it may cause display to fall! Watch
for pinch points. Do not put your fingers between movable
parts.
IMPORTANT ! : Ensure Q-Latch flag securing display is
completely raised at all times except when removing or
installing display. The flag must be all the way up when
installing or removing cables.
1. With display securely supported, unlock display from TPS
(A) by lowering the Q-Latch flag all the way down to the
unlocked position. (See Figure 14)
Figure 14
2. Using two people, slide display up and out of TPS (A).
(Optional) Security Lock
A hole is provided in the Q-Latch flag and TPS faceplate (A) to
accommodate the insertion of a padlock or similar locking
device.
1. Insert padlock (not included) through lower (lined up) holes
of Q-Latch flag and TPS faceplate (A). (See Figure 15)
Figure 15
(A)
Unlocked
1
(A)
1
Q-Latch flag
(A)
Display