CHIEF MPT6000 User Manual
Page 6
MPT6000
Installation Instructions
6
Mounting Display
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the MPT6000 up to (and
including) the display does not exceed 125 lbs (56.7 kg). Use
with products heavier than the maximum weight indicated
may result in collapse of the mount and its accessories
causing possible injury.
1.
Make sure locking flag on faceplate is in the open position.
(See Figure 2)
Figure 2
2.
Move mount faceplate to extended position by grasping
faceplate and pulling outward away from wall.
CAUTION:
Keep hands and fingers away from all pinch
points when moving the mount from retracted to extended
position.
3.
Insert mounting buttons on display interface into four
teardrop holes on faceplate. (See Figure 3)
Figure 3
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SEVERE PERSONAL INJURY
OR DAMAGE TO EQUIPMENT! Displays can weigh in
excess of 50 lbs (22.68 kg). ALWAYS use as least two people
and use proper lifting techniques when installing display.
4.
Move locking flag to locked position.
5.
Secure display by installing 5/16-18 x 1/2" button head
security screw (D) through locking flag hole and into 5/16-
18" security nut (B). (See Figure 4)
Figure 4
locking flag
1
(A)
interface (example)
3
4
(D)
(B)