CHIEF FSA1015 - Manual (Page 7)

Installation Instructions Model: FSA-1015
7
ASSEMBLY (PART 2)
WARNING: Failure to use proper fasteners can result
in serious personal injury or damage to equipment!
Screws (30 and 40) supplied for convenience only.
1. Using Phillips screwdriver install FSA-1015 assembly
to equipment rack using four screws (30, 40, or other
fasteners as applicable)(See Figure 10). Tighten
fasteners.
Figure 10: Install FSA-1015 to Equipment Rack
2. Return to INSTALLATION OPTION "A," "B," "C," or
"D," as applicable.
30 or 40
(4 places)
Equipment Rack Rail
(left side shown;
right side similar)
NOTE: Display / mount not shown for clarity.