ADS Technologies USB Instant DVD - Manual (Page 12)

10
USB INSTANT DVD INSTALLATION
In this section we will connect all audio
and video cables that you will use to
capture audio and video and then send
audio and video back to a TV or VCR for
viewing or recording.
2. Wire It Up!
1. Connect your video source (VHS,
DVD, Laser Disc Player, TV. etc.) to
your USB Instant DVD.
Connect your (D) 6 ft. A/V In cable to
the 3 RCA jacks to your analog audio/
video source RCA Line Out.
The other end connects to the “RCA
Video In” jack and “Audio In” jack on the
back of your USB Instant DVD.
A/V Source
USB Instant DVD
Check Contents - Wire it Up! - Plug It In! - Install Optimize System- - Verify Installation - Set Audio Mixer - Installation Summary
CapWiz manual.p65 6/4/2002, 12:21 PM 10